2m Flash - Use Fmuv3 Firmware Apr 2026

uint8_t percent = flash_status.percent_used;

// Feature flag for FMUV3 target #if defined(USE_ADAPTIVE_BLACKBOX) && defined(FLASH_M25P16) #define USE_ADAPTIVE_BLACKBOX_FEATURE #endif Add to src/main/target/MATEKF405/target.h : 2m flash - use fmuv3 firmware

I'll help you create a feature for an using FMUV3 firmware (Betaflight target: MATEKF405 or similar F4 with 2MB flash). This feature will be a Blackbox logging manager with adaptive recording that optimizes flash storage. Feature: Adaptive Blackbox Manager for 2M Flash // File: src/main/drivers/adaptive_blackbox.c // Feature: Auto-manages 2MB flash with intelligent recording #include <stdbool.h> #include <stdint.h> #include "platform.h" #include "drivers/flash.h" #include "drivers/flash_m25p16.h" #include "drivers/time.h" #include "build/build_config.h" uint8_t percent = flash_status

// Rate calculation: 1kHz = ~2KB/sec (gyro+accel+debug) switch(adaptive_bb_config.resolution) { case 0: // Low (500Hz gyro, no accel) bytes_per_second = 800; break; case 1: // Normal (1kHz gyro, 1kHz accel) bytes_per_second = 2000; break; case 2: // High (2kHz gyro, 1kHz accel, debug) bytes_per_second = 4000; break; default: bytes_per_second = 2000; } uint8_t percent = flash_status.percent_used