ASME PTC 19.11 is an essential technical standard for anyone responsible for steam and water sampling in thermal power plants. It bridges the gap between raw analytical chemistry and reliable thermodynamic performance testing. Adherence to its requirements minimizes sampling errors, protects expensive equipment, and ensures that cycle chemistry data are both defensible and reproducible. Disclaimer: This report is a summary for informational purposes. For formal performance testing, users must purchase and follow the complete ASME PTC 19.11 standard from ASME.
| Requirement | Specification | |-------------|----------------| | | Installed in straight pipe run (≥10D upstream, 5D downstream). | | Sample line material | Stainless steel or Teflon – no copper, brass, or rubber. | | Maximum transport time | < 30–60 seconds (depending on analyte). | | Cooling | Sample temperature after cooler: < 25°C (77°F). | | Pressure reduction | Two-stage (primary orifice + secondary regulator). | | Isokinetic sampling | Required for two-phase flow (e.g., saturated steam/water mixtures). | | Minimum flow rate | Typically > 250 mL/min to reduce dead volume. | Asme Ptc 19.11 Pdf
Overview and Technical Summary of ASME PTC 19.11 Standard for Steam and Water Sampling ASME PTC 19
| Standard | Focus | Key Difference | |----------|-------|----------------| | | Sampling for performance tests | Rigorous probe/transport conditions | | ASTM D1066 | Steam sampling for chemical analysis | Less detailed on conditioning systems | | EPRI Guidelines | Cycle chemistry control | Focuses on limits and corrosion prevention | | ISO 5667-4 | Water sampling (general) | Not power cycle specific | Disclaimer: This report is a summary for informational