Epson M105 Ink Pad Resetter -

He called the authorized service center. The quote made him wince: ₹2,500 for a “pad replacement” and a manual counter reset. Worse, they’d need five working days. Desperate, he stumbled upon a niche forum post: “Epson M105 ink pad resetter – DIY in 5 minutes.”

The device doesn’t clean or replace the physical pads. It simply forces the printer’s internal counter back to zero. Epson designs the printer to treat this counter as a hard stop, but a resetter tells the printer: “The pads are new. Carry on.” epson m105 ink pad resetter

Rohan ordered one from an online seller for ₹450. It arrived the next day—a green circuit board in an anti-static bag, with two clips and a small push button. He called the authorized service center

The Email That Saved a Printer: An Epson M105 Story Desperate, he stumbled upon a niche forum post:

He disconnected the tool, reassembled the scanner, and held his breath as he powered on the printer. The amber light was gone. The printer whirred back to life. A test page slid out—perfectly printed.

“Service required. Parts inside your printer are near the end of their service life. See your documentation.”

Rohan knew the physical pads were still full. The resetter had only tricked the software. He now faced a risk: if the pads truly overflowed, ink would seep into the printer’s base, possibly ruining the power supply or logic board. For the short term—finishing his thesis—it was worth it. For the long term, he cut a piece of absorbent craft felt and slid it under the pad area as a DIY overflow catcher.