Etabs Mass Summary By Story Here

But when he ran the modal analysis, the building had massive torsion. He spent days adding shear walls.

But here is a hard truth:

ETABS doesn't just use "dead load." It calculates mass based on your load combinations. Specifically, for seismic analysis (per ASCE 7, IS 1893, or Eurocode 8), it typically uses: etabs mass summary by story

The "Where is my Mass?" Mystery Here is the most common panic moment for engineers: "I assigned a 10-inch slab, beams, columns, and walls... so why does the Mass Summary show almost nothing on the roof?"

If you use Rigid Diaphragms, your Mass Summary will show a single point mass at the CM. This is fine for simple boxes. But if you have a podium slab or a building with a hole (an atrium), using a rigid diaphragm will overestimate torsion because mass is artificially concentrated. But when he ran the modal analysis, the

If you’ve ever run a seismic analysis in ETABS, you’ve probably scrolled past the Mass Summary by Story table. It looks harmless enough—just a few columns of numbers under the Display > Show Tables > Analysis > Results > Structure Output menu.

If you modeled a concrete slab but forgot to assign Self Weight Multiplier = 1 (under ), ETABS will only include the superimposed dead loads (finishes, partitions) and completely ignore the 150 pcf concrete you just modeled. Specifically, for seismic analysis (per ASCE 7, IS

Self-weight assignment.

Let’s dive into what those numbers actually mean, why ETABS sometimes lies to you (well, not lies , but misleads you), and how to use this table to save your design. In simple terms, the Mass Summary tells you how much weight is pushing down on each level of your building—and more importantly, how that weight moves sideways during an earthquake.