Hard Reset Zeblaze Stratos 3 Apr 2026

Scroll down and tap System (or sometimes More Settings > System ).

On your phone , go to Settings > Bluetooth . Step 2: Find "Zeblaze Stratos 3" in the list of paired devices. Tap it and select "Forget" or "Unpair" . Step 3: Open the GloryFit app (or whichever app you use – Zeblaze often uses GloryFit, Launcher, or a custom app). Step 4: Go to Device tab > Add device . Step 5: Select Zeblaze Stratos 3 from the list and complete pairing. Step 6: If the watch asks to "Restore backup" or "Set as new device," choose Set as new device . Troubleshooting: Hard Reset Not Working? | Issue | Solution | |-------|----------| | Watch won't turn on after reset | Charge for 2+ hours using the original magnetic charger. | | Watch is still paired to old phone | Go to phone Bluetooth settings and manually forget the device. | | Buttons do nothing during Method 2 | Your firmware may have a different combo. Try: Hold Upper Right button only for 30 seconds, then release, then immediately press and hold Upper + Lower together. | | Data is still there | You performed a soft reboot, not a hard reset. Repeat Method 1 or ensure you selected "wipe data/factory reset" in recovery. | Quick Summary (Cheat Sheet) | Situation | Action | |-----------|--------| | Watch working | Settings > System > Reset > Confirm | | Watch frozen | Hold Upper Right button 20 sec to force reboot, then use Settings | | Watch won't boot | Try button combo (Lower Right first, then Upper) to reach recovery mode | Hard Reset ZEBLAZE Stratos 3

Scroll to the bottom and tap Reset (or Factory Reset / Restore Factory Settings ). Scroll down and tap System (or sometimes More

Wake the watch by pressing the Upper Right button (crown). Tap it and select "Forget" or "Unpair"

You will see a confirmation message: "Erase all data & reset?" Tap the checkmark (✓) or Confirm .