You can adjust the tone depending on where you post it. Understanding the Register Code Generated by Image2LCD (Bitmaps to MCU Display)
void setup() { LCD_Init_Pins(); LCD_Send_Init_Sequence(init_code, sizeof(init_code));
// Register code (CMD, DATA) 0x01,0x00, // Software Reset 0x11,0x00, // Exit Sleep 0x3A,0x55, // Pixel Format (16-bit) 0x36,0x48, // Memory Access (RGB/BGR order) 0x2A,0x00,0x00,0x00,0xEF, // Column Address Set 0x2B,0x00,0x00,0x00,0xEF, // Page Address Set 0x29,0x00 // Display ON Do not just paste this into your main loop. You need to send it to your LCD via SPI/I2C. Here’s a typical driver flow:
Happy embedding!
// Your Image2LCD generated list const uint8_t init_code[] = { 0x01,0x00, 0x11,0x00, 0x3A,0x55, 0x29,0x00 };
I’ve been working with small TFT or monochrome LCDs (like ILI9341, ST7789, or SSD1306) and using to convert bitmap images into C-style arrays. However, the "register code" it generates can be confusing if you're not sure how to interface it with your MCU's driver.
Image2lcd Register Code Official
You can adjust the tone depending on where you post it. Understanding the Register Code Generated by Image2LCD (Bitmaps to MCU Display)
void setup() { LCD_Init_Pins(); LCD_Send_Init_Sequence(init_code, sizeof(init_code)); image2lcd register code
// Register code (CMD, DATA) 0x01,0x00, // Software Reset 0x11,0x00, // Exit Sleep 0x3A,0x55, // Pixel Format (16-bit) 0x36,0x48, // Memory Access (RGB/BGR order) 0x2A,0x00,0x00,0x00,0xEF, // Column Address Set 0x2B,0x00,0x00,0x00,0xEF, // Page Address Set 0x29,0x00 // Display ON Do not just paste this into your main loop. You need to send it to your LCD via SPI/I2C. Here’s a typical driver flow: You can adjust the tone depending on where you post it
Happy embedding!
// Your Image2LCD generated list const uint8_t init_code[] = { 0x01,0x00, 0x11,0x00, 0x3A,0x55, 0x29,0x00 }; Here’s a typical driver flow:
Happy embedding
I’ve been working with small TFT or monochrome LCDs (like ILI9341, ST7789, or SSD1306) and using to convert bitmap images into C-style arrays. However, the "register code" it generates can be confusing if you're not sure how to interface it with your MCU's driver.