Jlink V9 Schematic Apr 2026

While you cannot legally produce a clone, studying this architecture will make you a better hardware designer. For your own projects, consider using the open-source schematic (which is freely available) or buying an official J-Link EDU Mini to support SEGGER.

If you have been doing embedded development for any length of time, you have almost certainly used a J-Link by SEGGER. The V9 edition (often referred to as the "EDU" or standard version in its era) represents a sweet spot in debugger evolution: it moved away from the older 20-pin parallel port designs toward a modern, high-speed USB 2.0 microcontroller-based architecture. jlink v9 schematic

VCC_MCU (3.3V) VTref (Target) | | +-------+ +--------+ | | | | [VCCA] [GND] [VCCB] [GND] | | | | +------+-------+------------+--------+------+ | 74LVC8T245 | | A1 (3.3V) <-----> B1 (Target) ----> SWDIO | | A2 (3.3V) <-----> B2 (Target) ----> SWCLK | +---------------------------------------------+ | | [LPC4322] [Target GPIOs Header] Even with a perfect schematic, the J-Link V9 relies on firmware . The LPC4322 contains a bootloader that talks to the SEGGER DLL on your PC. The DLL sends encrypted firmware updates. While you cannot legally produce a clone, studying