Yes, 3.2% O₂ is consistent with 15% excess air. Question 4 – Thermodynamics (Rankine Cycle) In an ideal Rankine cycle with boiler pressure 10 MPa and condenser pressure 10 kPa, what happens to cycle efficiency if boiler pressure increases to 15 MPa (condenser pressure fixed)? A) Efficiency increases B) Efficiency decreases C) Efficiency unchanged D) Efficiency increases only if superheat is added
C) 425°C – 550°C (above 400°C for carbon steel) Question 8 – Boiler Operation (Hydrostatic Test) After a major boiler repair, you perform a hydrostatic test. The test pressure for a power boiler per ASME Section I should be: A) 1.25 × MAWP B) 1.5 × MAWP C) 2.0 × MAWP D) MAWP + 100 psi power engineering 3b1 exam questions
| Topic | Approx. % | |-------|-----------| | Boiler design, types, and construction | 20% | | Boiler fittings and accessories | 15% | | Combustion and fuel systems | 15% | | Thermodynamics (steam properties, cycles) | 15% | | Materials and welding | 10% | | Water treatment | 10% | | Draft systems and fans | 8% | | Safety and ASME/CSA codes | 7% | Question 1 – Boiler Design (Metallurgy) A firetube boiler shell is subject to internal pressure. The maximum allowable stress for the shell material at 200°C is 120 MPa. The shell inside diameter is 1.5 m, and the required thickness is 18 mm. Calculate the maximum allowable working pressure (MAWP) using the thin-shell formula for a cylinder. Yes, 3
( Q_2 = 50 \times \frac12001450 = 41.38 \ \textm³/s ) ( P_2 = 2.5 \times \left(\frac12001450\right)^2 = 2.5 \times 0.684 = 1.71 \ \textkPa ) Question 7 – Materials (Creep) At what temperature range does creep become a design concern for carbon steel in boiler service? A) 150°C – 200°C B) 350°C – 400°C C) 425°C – 550°C D) > 600°C The test pressure for a power boiler per