Rgd-173 -hrc- Legs Apr 2026

RGD-HRC-LEG-0426 Subject Area: Robotic Mobility Systems / Composite Structural Mechanics Abstract This paper presents the mechanical design, material selection, and gait analysis of the RGD-173 robotic platform, focusing specifically on its High Rigidity Composite (HRC) leg assembly . Traditional legged robots suffer from a trade-off between impact absorption and positional accuracy under load. The RGD-173-HRC-Legs address this by employing a carbon-fiber reinforced polymer (CFRP) exoskeletal shell with a metallic lattice core. We demonstrate that the HRC legs achieve a stiffness-to-weight ratio 40% higher than aluminum equivalents while maintaining a safety factor of 3.5 under vertical loading. Kinematic simulations and physical prototypes confirm stable trotting gaits at 1.2 m/s with a 15 kg payload. 1. Introduction The demand for legged robots in unstructured environments (disaster recovery, construction inspection) requires limbs that are both lightweight and highly rigid. The designation RGD-173 signifies the 173rd iteration of the Rigid Ground Demonstrator series. This paper details the HRC (High Rigidity Composite) legs—a departure from series-elastic actuators in favor of geometrically locked, high-stiffness structures for precision stepping. 2. Mechanical Design Specifications (RGD-173 -HRC- LEGS) | Parameter | Value | Unit | | :--- | :--- | :--- | | Degrees of Freedom (per leg) | 3 (Hip, Knee, Ankle) | - | | Total Leg Length (fully extended) | 520 | mm | | Dry Mass per leg | 1.85 | kg | | Max Radial Load (static) | 850 | N | | Composite Layup | [0/90/±45] CFRP + Rohacell foam | - |

Design Team, RGD Program.

Design and Kinematic Validation of the RGD-173: A High-Rigidity Composite Leg System for Dynamic Payload Support RGD-173 -HRC- LEGS