It’s frustrating. You know your machine could cut faster or engrave deeper, but a safety handshake between the controller and the software is holding it back.
The good news? You can fix this with a process known as (often called entering "Factory Mode" or removing the "Foreign Object Detection" limits). xtool unlock
If you own an xTool laser (especially a diode model like the D1 Pro or the S1), you’ve probably seen the warning: “Firmware locked. Maximum speed limited.” It’s frustrating
You are a beginner, run the machine unattended, or have pets/kids in the shop. The "Legal" Alternative Before you unlock, try xTool's "Fast Mode" in XCS (version 1.9+). It increases acceleration without disabling safety sensors. You get about 70% of the unlock speed with 100% of the safety. For most users, Fast Mode is enough. Final verdict: The unlock turns your xTool from a responsible family SUV into a race car. It’s thrilling, but you better know how to handle the skid. You can fix this with a process known
Have you unlocked your xTool? Let me know in the comments which model you’re running and if you noticed the speed difference. Disclaimer: This post is for informational purposes. Always follow your local laser safety regulations and manufacturer guidelines.